• Nurashingles
  • System Information
    • Introduction
    • Warranty
    • Application
    • Things to consider
    • Surface Finish Options
    • Maintenance Requirement
    • Manufacturer
    • Technical Information
    • FAQs
  • In Action
    • Project examples
  • Architectural Resources
    • Specifications
    • Detail Drawings

Nurashingles Maintenance Requirement

To get the longest life from a roof it must be regularly inspected & maintained.

When first installed there should be inspections each spring and autumn, to enable the effects of annual extremes of weather to be checked. Following that an annual program of roof inspection and cleaning should be established by the building owner as part of general building maintenance.

Roofs exposed to high levels of pollution or in close proximity to trees might require more frequent inspection.

Any inspection of a roof should include the interior of the building for signs of water penetration or condensation and for alterations, which may have affected the roof. Externally, abutting construction, which can affect the performance of the roof, should also be inspected.

Annual Inspections & Cleaning

Inspections

The inspection should concentrate on “high risk” areas such as hatches, drains and around all roof top equipment, as well as a general inspection of the entire roof. Inspections should also include the examination of the roof deck if possible from the underside for evidence of leaks, deteriorated decking, structural cracks or movement and other deficiencies. Parapets and edging should also be examined for evidence of cracking, deterioration and moisture infiltration.

Damage

If damage is found on the roof surface it should be repaired immediately by an approved Nuralite Applicator. They will use NURAPLY 3P component products and special techniques to achieve neat, unobtrusive reinstatement of the NURAPLY 3P.

Cleaning

Location, traffic level, effective drainage, and service use will dictate cleaning requirements. Sweeping clean followed by hose and broom washing of the NURAPLY 3P roof is recommended, not waterblasting. If mould does appear it should be removed with a long-term mould killer such as Nuracide.

You may do this yourself or talk to your applicator if you would like them to include you in an annual program of inspections & cleaning.

Five Year Authorised Service Checks

To maintain your warranty, every five years you must have an Approved Applicator visit to inspect the roof and ensure it remains in good condition.

The Applicator will thoroughly check the roof for signs of damage, water ingress or potential problems. As well, they will also check on the condition of any Nuracolour coating which will need recoating every 5 – 10 years. These checks are inexpensive and are the best way to ensure the roof over your head stays in top condition.

Link to NURAPLY MAINTENANCE PROGRAMME.pdf