What is Nuraply 3PM?
Installed as two complete waterprooﬁng layers for redundancy the completed system is commonly called “bulletproof”. It is finished with granules of slate that give it an attractive, natural appearance. Nuraply 3PM system is a tough, reinforced, bituminous waterproofing membrane suitable for light maintenance foot traffic.prev next
How is it installed?
Nuraply 3PM is used for waterproofing flat roofs or decks protected with timber or tiles. Nuraply 3PM is installed as the capsheet in a two layer membrane system. The basesheet is usually 3PB but use 3PV as a base sheet for concrete or roof decks where excessive moisture or moisture vapour occurs.prev next
- Bulletproof, low maintenance waterproofing.
- 20-year product warranty.
- CodeMark ensures certainty with building consents.
- 1o guarantee allows design flexibility.
Ellen Melville Centre
Stevens Lawson Architects
Warren & Mahoney
Harris Butt Architects
Otago Settlers Museum
Baker Garden Architects
Whare Mahanga- Twin House
Nuraply 3PM White
Looking for Specs and CAD Details?
Find the perfect solution for your project here:
Choose a bulletproof, double layer system or a sleek single layer TPO system.
Create a floating deck using tiles or timber on a new or over an existing substrate.
Robust waterproofing of basement walls, foundations and under the floor slab.
Renew and improve your existing membrane or metal roof.
What is the finished look you desire?
Add your email address below to access details.
Please complete your details to access downloads.
Please contact us to discuss this project.
Our technical team are available on:
0800 NURALITE (0800 687 254)
Membrane Fall/ Slope Table
|Substrate||Plywood||Concrete||Existing Substrates||Concrete with Tapered Boards or Flat Enertherm (Nuratherm)||Plywood with Enertherm
|NPM900 or approved metal tray (B) with Enertherm
|Minimum Finished (Constructed) Falls||1:80||1:80||1:80||1:80||1:80||1:80|
|Recommended Design Fall (excluding gutters) (A)||1:40||1:60||1:60 Confirm no ponding areas||1:60||1:40||1:40|
|Substrate Comments||Using 17mm (roofs) or 21mm (decks) plywood, rafters at 600 centers, nogs at 600 centers.||Create required slope with a screed. Wait for concrete and screed to cure.||Confirm substrate is sound||*Minimum fall available using tapered boards is 1:60. Nuralite can assist with tapered board layout.||Create required slope in the plywood||Create required slope in the NPM900|
Nuratherm Warm Roof
Drone footage of Howick College